We service both gas and electric furnace systems with manufacturer-trained technicians.
Flat-rate pricing quoted after diagnosis, no pressure toward a premature system replacement.
If you're dealing with a pilot light that won't stay lit, an ignitor that clicks but never catches, or a furnace that runs but blows cold air, you already know furnace failures carry a safety dimension — carbon monoxide and gas leaks — that most other HVAC repairs don't, so the diagnostic has to start there.

Waiting rarely saves money and often turns a same-day repair into a longer, more involved job.
AAA Pro HVAC built its furnace repair process around one idea: diagnose first, quote honestly, fix it right.
We're licensed, insured, and staffed with techs who've spent years specifically on furnace repair, not general handyman work with an HVAC certificate bolted on.

Cracked heat exchangers get flagged immediately as a safety issue, not just a repair line item.
We carry manufacturer service manuals for major furnace brands.
Diagnosis happens first, and the quoted flat rate reflects the actual confirmed fault.
No-heat calls during freeze warnings get moved to the front of the schedule.
Every job starts with a real diagnosis, not a guess — here's the full scope of what our furnace repair technicians handle across Simi Valley, CA.
Standing pilot systems get checked for thermocouple failure, the most common cause of a pilot that won't hold. Techs handling ignitor & pilot light repair carry the specific parts and tools this job calls for, not a generic kit.
A gas valve that won't open or won't seal is tested with proper manometer readings, not just listened to. Techs handling gas valve diagnostics carry the specific parts and tools this job calls for, not a generic kit.
We use a combustion analyzer and visual borescope inspection, not guesswork. This is one of the most requested furnace repair calls we get across Simi Valley, CA.
We test motor amp draw against rated spec before replacement. This is one of the most requested furnace repair calls we get across Simi Valley, CA.
We inspect the full flue run, not just the connection at the furnace. This is one of the most requested furnace repair calls we get across Simi Valley, CA.
We test low-voltage circuits before condemning the board. This is one of the most requested furnace repair calls we get across Simi Valley, CA.

Gas odor reports get immediate safety instructions before dispatch details.
We confirm your Simi Valley address and a realistic arrival window.
Flat-rate quote follows the confirmed fault, before repair begins.
Heat exchanger findings are documented clearly regardless of outcome.

Tech tested the ignitor's resistance right in front of me and swapped it in under thirty minutes.
Old furnace was blowing cold air even though the blower ran fine.
They found a hairline crack in the heat exchanger I never would've noticed.
Pilot light kept going out every few hours.

Usually a failing ignitor or a fouled flame sensor — both are testable with the right equipment rather than replaced blind.
We'll walk you through options including repair versus replacement honestly.
Could be a delayed ignition fault, a failed gas valve, or a limit switch issue — a full diagnostic narrows it down.
Electric resistance furnaces fail differently than gas units, and we diagnose accordingly.
Immediately — leave the area and call, don't attempt to diagnose it yourself.
No-heat calls during freeze warnings are prioritized across Simi Valley, CA.

Our furnace repair crews are positioned throughout Simi Valley, CA to keep response times realistic, not just promised.
☎ Call +1-866-805-8548 for Simi Valley Service